Technical Specifications DVB, MPEG2
   
LNB / Tuner input  
Connector 1 x "F"-type
RF input frequency 950~2150MHz
RF input power level -20~-65 dBm
Supply voltage 13/18 V 5%
Max. current 500mA, overload protected
Control voltage 22KHz, 0.65 Vpp
DiSEqC Tone burst A/B or Level 1.2
RF impedance 75 ohm
   
Video  
Connector 1 x RCA
   
Audio  
Connector 2 x RCA ( R+L )
Output 0.5 Vrms m 0.5 dB / RL 10 k ohm
   
Serial (RS232) serial data  
Connector 9-pin D-sub male
Signals RS232, max. 115.2 kbit/s
Pin out  
1 DCD (Data carrier detect) not connected
2 RXD (receive data)
3 TXD (Transmit data)
4 DTR (Data terminal ready) Set to high
5 GND (Signal ground)
6 DSR (Data set ready) not connected
7 RTS (Ready to send)
8 CTS (Clear to send)
9 RI (Ring indicator) not connected
   
Other Data  
Supply voltage 110~240V AC, 47~63Hz
Power consumption max. 20W at 500mA LNB load
Power consumption in standby 5W
Operating temperature +5C to +40C
Storage temperature -40C to +65C
Humidity 25 to 90% rel humidity
Operating distance for remote control max. 10 meters
Dimensions ( w x d x h) 295 x 210 x 40 mm
Weight 2000 g approximate

ASC321 Spitfire
Single Output

 

Features:

bbluet.jpg (435 bytes) Suitable for Existing Analog and Digital Reception
bbluet.jpg (435 bytes) Various Input Frequency Range and L.O. For World Wide Market
bbluet.jpg (435 bytes) Low Phase Noise for not only Analog also Digital Reception
bbluet.jpg (435 bytes) Superior Low Noise Figure & High Isolation
bbluet.jpg (435 bytes) Voltage-Controlled H/V Switching (13/18 V)
bbluet.jpg (435 bytes) Excellent D.R.O. Stability
bbluet.jpg (435 bytes) Super Compact Tooling
bbluet.jpg (435 bytes) Best Solution for Individual and Multi-Satellite System
bbluet.jpg (435 bytes) 40 mm Plastic Cover
Specifications
FREQUENCY RANGE 11.7~12.25 GHz
OUTPUT FREQUENCY 950~1500 MHz
CROSS POL. ISOLATION 22dB (TYP.)
NOISE FIGURE 0.6dB or better (TYP.)
CONVERSION GAIN V: 60dB (TYP.)
H: 60dB (TYP.)
L.O. FREQUENCY 10.75 GHz
L.O. FREQUENCY STABILITY 1 MHz (ROOM TEMPERATURE)
3 MHz (-40
TO  +60)
L.O. PHASE NOISE -50dBc/Hz (@ IKHz)
-75dBc/Hz (@ 10KHz)
-95dBc/Hz (@100KHz)
OUTPUT POWER LEVEL
(AT 1 dB GAIN COMPRESSION)
5dBm (TYP.)
IMAGE REJECTION 45dB (min.)
DC CURRENT CONSUMPTION 130 mA
OPERATING VOLTAGE 11.5~14.0 V    VERTICAL POL.
16.0~22.0 V    HORIZONTAL POL
 

Winegard DS2076

76 cm

 
Mechanical
  Effective aperture
76 cm (29.9 in.)
  Antenna height
87 cm (34.3 in.)
  Antenna width
80 cm (31.5 in.)
  Galvanized steel
20 ga.
  Weight, antenna only
4.18 Kg. (9.8 lbs.)
  F/D
.59
  Offset angle
24
  Focal distance
44.6 cm (17.56 in.)
  Surface accuracy
.016 - .020 in. ave.
  Elevation range
10 to 90
  Mounting options
Universal
Electrical
  Frequency range
10.95-12.75 GHz

Gain at mid-band

11.2
12.1
12.6
37.6 dBi
38.3 dBi
38.7 dBi
 Aperture efficiency
73%
  Cross polarization (on axis) -21 dB
  Beamwidth at -3 dB 2.4*
  Beamwidth at-10 dB 4.0*
Environmental
  Wind loading  
     - Operational 80.5 Km/hr. (50 mph.)
     - Survival 161 Km/hr. (100 mph.)
  Atmosphere 10 yrs.
Feed support models
  DS-2076 - Universal feed support
  (clamp size 23, 25, 35, 40, 50 mm)

DMS International is the largest distributor of the
Winegard DS2076 in the United States.

DS-2076 - w/Universal feed support
  (clamp size 23, 25, 35, 40, 50 mm)